Special Considerations for Emergencies
• If you press the emergency button while in a channel that has
no emergency capability, a low-pitched tone sounds.
• If the unit is out of the range of the system and/or the
emergency alarm is not acknowledged, a tone sounds and
the display shows No acknowledge.
• If you press the emergency button, then change to a mode
that has no emergency capability, the display shows
No Emergency and a continuous low-pitched tone sounds
until a valid emergency mode is selected or until the
emergency is cancelled.
• When an emergency is active, changing to another mode
where emergency is enabled (trunked or conventional)
causes an emergency alarm and/or emergency call to be
active on the new mode.