Conventional Mode Operation - Motorola ASTRO APX O2 Control Head Mobile Radio User Manual

Trunked Modes Only:
1
Press the PTT button.
2
If you hear two, short, high-pitched tones, or if you hear no
t
tone and the indicator lights steadily, then proceed with
your message.
3
Release the PTT button to receive (listen).
If you are not in the range of the system, you may hear a
continuous low-pitched tone and the display shows
range
.


Conventional Mode Operation

This feature allows you to monitor channel traffic on
conventional channels by defeating the coded squelch. This
way, you can listen to another user active on the channel. Thus,
you may be prevented from talking over someone else's
conversation.
Note: This feature must first be enabled by a qualified radio
technician or system administrator.
Procedure:
Take the control head off hook. (This is the same as monitor on.
You hear all channel traffic.)
OR
1
At Home mode where the default zone and channel are
being displayed,
2 Press the Menu Select button directly below Mon
momentarily to activate monitoring. The display shows
Monitor on.
3
Press the Menu Select button to deactivate the monitoring.
The display shows Monitor off.
Out of
> <
button (on the keypad mic.) to Mon.
or
39
English