Compak RETAIL R140 Instruction Manual page 13

8.2. Hopper placement
Remove the upper body (
grinder.
Place the hopper (
lid ( ) lines up with the backside of the grinder. Push down and turn clockwise until
the hopper clicks into place on the upper body (
Turn the upper body around and fix the hopper to the grinder body with the safety
screw that comes along with the grinder (Fig. 3).
NOTE: The manufacturer cannot accept responsibility for any damage casued by
improper use of the machine.
8.3. use
Open the hopper lid (
coffee is inside the hopper, it can not be removed.
Press the bag support handle (
tube ( ), then release the handle so the bag remains fixed in place.
Push the start button (
process will start (the selected grinding choice icon will flash). Once you have ground
the desired quantity of coffee, push the grinding stop button (
front setting dial (
Remove the bag, holding it with one hand and with the other, push the bag support
handle ( ) down to release it.
K04673 | v. 30/04/2014 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS
) by unscrewing the two screws on the backside of the
) on the upper body and make sure that the hinge of the hopper
), fill the hopper (
) and put the empty bag around the coffee discharge
) on the left of the front setting dial (
).
) (Fig. 4 & 5).
) with coffee and close the lid. Once the
) and the grinding
) on the right of the
11