Results Format Explained; Setting Results Format - Lifeloc FC10Plus Operation Manual

Lifeloc FC10

Results Format Explained

Results for Auto and Manual tests can be displayed in a "NUMERIC" or "PASS/WARN/
FAIL" (PWF) format. Passive test results, however, can only be displayed as "POS" &
"NEG".
NUMERIC results are in a 3-digit BAC format.
PASS/WARN/FAIL results require setting specifi c levels for Pass and Fail.
For example, if Pass is set at .040 and Fail is set at .080
(default settings on your FC10
Pass
Warn
Fail

Setting Results Format

Press the Function button until the display reads "SETTINGS".
Press the Execute button. Display reads "TIME".
Press the Function button until the display reads "DISPLAY SETTINGS".
Press the Execute button. Display reads "LCD CONTRAST".
Press the Function button until the display reads "RESULTS FORMAT".
Press Execute to toggle between "NUMERIC" and "PWF".
Press the Function button to save your setting.
Momentarily press Power to return to the testing mode.
Plus
= .000 - .040
= .041 - .079
= .080 and above
PASS
www.Lifeloc.com
User Settings
Plus
), then:
Sample settings only. See
page 18 for instructions on
setting the Pass/Warn/Fail
levels.
FAIL
| 303-431-9500
17