Conducting An Automatic Test; Manual Override During An Automatic Test - Lifeloc FC10Plus Operation Manual

Lifeloc FC10

Conducting an Automatic Test

Turn the FC10 Plus on.
Verify the display reads "AUTO TEST".
Attach the mouthpiece to the back of the
unit.
Instruct the subject to blow into the
mouthpiece fi rmly and steadily for as long
as they can. (But not necessarily as hard
as they can.) The unit calculates volume
and will give an error message if the
subject cannot reach 1.3 liters.
Read the result.
After taking a test, the FC10
the results in large numbers on the display.
Press the Function button to return to the
test mode.

Manual Override during an Automatic Test

Note: This feature allows the completion of a test in the occasional instance when the
subject may have diminished lung capacity and cannot activate the Auto Test.
Turn the FC10 Plus on.
Attach a mouthpiece to the back of the unit and verify the display reads "AUTO TEST".
Instruct the subject to blow into the mouthpiece fi rmly and steadily for as long as they
can.
When they are near the end of their breath, press the Execute button.
Read the result.
Plus
Plus will display
www.Lifeloc.com
Breath Testing Modes
| 303-431-9500
10