Table of Contents Table of Contents Lifeloc Technologies, Inc Lifeloc Technologies, Inc INTRODUCTION INTRODUCTION Welcome Welcome Front View Front View Standard Features Standard Features PREPARATION PREPARATION Installing Batteries Installing Batteries Attaching a Mouthpiece Attaching a Mouthpiece On/Off On/Off Observing the Subject...
Page 4
Table of Contents Table of Contents Lifeloc Technologies, Inc Lifeloc Technologies, Inc USER SETTINGS USER SETTINGS Display Contrast Display Contrast Test Order Sequence Test Order Sequence Results Format Explained Results Format Explained Setting Results Format (PASS/WARN/FAIL) Setting Results Format (PASS/WARN/FAIL)
To the FC20 Portable Breath Tester Operator: WELCOME! WELCOME! The FC20 breath alcohol tester is manufactured in Den- The FC20 breath alcohol tester is manufactured in Den- ver, Colorado, by Lifeloc Technologies, Inc. Lifeloc offers ver, Colorado, by Lifeloc Technologies, Inc. Lifeloc offers...
Introduction Introduction FC FRONT VIEW FC FRONT VIEW Front view Front view without without mouthpiece. mouthpiece. Mouthpiece Mouthpiece removal tab. removal tab. AUTO TEST AUTO TEST #00013 #00013 Front view with Front view with mouthpiece mouthpiece a ached. a ached. Page 6 Page 6...
Press in and down on the battery door located on Press in and down on the battery door located on the back of the FC20 in the direction of the arrow. the back of the FC20 in the direction of the arrow.
OBSERVING THE SUBJECT OBSERVING THE SUBJECT The FC20 provides a highly accurate reading of The FC20 provides a highly accurate reading of breath alcohol acquired by sampling deep lung breath alcohol acquired by sampling deep lung air.
Read the result. Read the result. After taking a test the FC20 will display the results After taking a test the FC20 will display the results in large numbers on the display. in large numbers on the display.
Operation BREATH FLOW BREATH FLOW As the subject blows into the mouthpiece, the FC20 As the subject blows into the mouthpiece, the FC20 will show a graph of the breath flow on the dis- will show a graph of the breath flow on the dis- play.
Take a test. Plug the printer cable into the connector on the Plug the printer cable into the connector on the side of the FC20. side of the FC20. Press the Execute button, under the printer icon. Press the Execute button, under the printer icon.
Breath Testing Modes Breath Testing Modes EXPLAINED EXPLAINED The FC20 is capable of conducting 3 distinct types of breath The FC20 is capable of conducting 3 distinct types of breath tests. tests. Automatic Test is the most used and highest accuracy test.
Breath Testing Modes Breath Testing Modes CONDUCTING A MANUAL TEST CONDUCTING A MANUAL TEST Turn the FC20 on. Turn the FC20 on. Attach a mouthpiece to the back of the unit. Attach a mouthpiece to the back of the unit.
Hold the FC20 sample port (orange-colored open- Hold the FC20 sample port (orange-colored open- ing labeled Port on the back label of the FC20) ing labeled Port on the back label of the FC20) about 4 inches from the subjects mouth.
User Settings User Settings THE SETTINGS CHART THE SETTINGS CHART Settings Settings Execute Time Execute Time Function Function Date Date Function Function Auto Auto Number of Number of Airblank Airblank Copies Copies (Option) (Option) Function Function Function Function Shutoff Print Shutoff Print Time...
User Settings THE SETTINGS SCREEN THE SETTINGS SCREEN The FC20 has numerous internal settings allowing The FC20 has numerous internal settings allowing you to customize the unit to your individual needs. you to customize the unit to your individual needs.
Press the Execute button once. Press the Execute button once. Pressing the Function button repeatedly scrolls you Pressing the Function button repeatedly scrolls you through the FC20 user settings. through the FC20 user settings. 1. CHANGING THE TIME 1. CHANGING THE TIME From the “Settings”...
User Settings User Settings 2. CHANGING THE DATE 2. CHANGING THE DATE From the “Settings” display, press the Execute but- From the “Settings” display, press the Execute but- ton. ton. Press the Function button until the display reads Press the Function button until the display reads “Date”.
3. AUTOMATIC AIR BLANK (OPTION) Auto Air Blank is a factory option available on the Auto Air Blank is a factory option available on the FC20. FC20. If you have this option installed, refer to page 34 If you have this option installed, refer to page 34 of this manual for instructions on set-up and use.
User Settings 5. I.D. ENTRY EXPLAINED 5. I.D. ENTRY EXPLAINED The FC20 allows you to enter two different I.D. The FC20 allows you to enter two different I.D. numbers and/or names: the Operator (Batch I.D.) numbers and/or names: the Operator (Batch I.D.) and the Subject (Subject I.D.).
Page 24
The FC20 will now prompt you to enter a Subject The FC20 will now prompt you to enter a Subject I.D. using the + and - buttons before every test.
Page 25
FC20 administrators to prevent field personnel from performing any change to the field personnel from performing any change to the FC20 user settings or from performing a calibra- FC20 user settings or from performing a calibra- tion or cal check.
User Settings 7. PRINT SETTINGS EXPLAINED 7. PRINT SETTINGS EXPLAINED The FC20 settings allow you to customize your The FC20 settings allow you to customize your printout to your particular needs. You can choose printout to your particular needs. You can choose...
7. PRINTER SELECTION Printer selection allows you to select what device Printer selection allows you to select what device your FC20 will communicate with. your FC20 will communicate with. From the “Print Settings” display, press the Execute From the “Print Settings” display, press the Execute button.
User Settings 7. SAMPLE PRINT-OUTS 7. SAMPLE PRINT-OUTS Long Printout Short Printout Long Printout Short Printout ------------------------------ ------------------------------ ------------------------------ ------------------------------ Lifeloc Technologies, Inc. Lifeloc Technologies, Inc. Lifeloc Technologies, Inc. Lifeloc Technologies, Inc. FC20 v3.00d FC20 v3.00d FC20 v3.00d FC20 v3.00d Serial No.
User Settings User Settings 8. DISPLAY CONTRAST 8. DISPLAY CONTRAST From the “Display Settings” screen press the Exe- From the “Display Settings” screen press the Exe- cute button. cute button. Press the Function button until the display reads Press the Function button until the display reads “LCD Contrast”.
8. RESULTS FORMAT EXPLAINED 8. RESULTS FORMAT EXPLAINED The FC20 displays Auto Test and Manual Test results in a 3 digit The FC20 displays Auto Test and Manual Test results in a 3 digit BAC format. Passive test results are displayed as POS or NEG.
User Settings User Settings 8. SETTING RESULTS FORMAT (PASS/WARN/FAIL) 8. SETTING RESULTS FORMAT (PASS/WARN/FAIL) Press the Function button till the display reads “Fail Press the Function button till the display reads “Fail Level”. Level”. Press + or – button to set the BAC Fail level (eg., Press + or –...
Note: Failure to remember your password will Note: Failure to remember your password will require that the FC20 be sent back to Lifeloc to re- require that the FC20 be sent back to Lifeloc to re- initialize the password.
If Auto Air Blank is enabled, the FC20 will prompt you If Auto Air Blank is enabled, the FC20 will prompt you to take a sample before testing the subject.
AUTOMATIC ALTITUDE COMPENSATION AUTOMATIC ALTITUDE COMPENSATION The FC20 may be purchased with a fully integrat- The FC20 may be purchased with a fully integrat- ed automatic barometric pressure sensor installed. ed automatic barometric pressure sensor installed.
.100, .080 or .040 BAC. commonly used are: .100, .080 or .040 BAC. The FC20 must be between 67º and 100º to cali- The FC20 must be between 67º and 100º to cali- brate. (19° - 37° C) brate.
Page 36
FC20. in the FC20. Note: The FC20 comes from the factory set for wet Note: The FC20 comes from the factory set for wet bath simulator and a .100 solution standard.
Calibration Settings Calibration Settings CALIBRATION DISPLAY CHART CALIBRATION DISPLAY CHART CALIBRATION CALIBRATION Perform a Cal Perform a Cal Check Check Execute Execute Execute Execute XXX CHECK XXX CHECK Function Function Perform a Perform a Calibration Calibration Execute Execute CALIBRATE CALIBRATE Function Function Execute...
Calibration Settings Calibration Settings SETTING THE CALIBRATION STANDARD SETTING THE CALIBRATION STANDARD From the “CALIBRATION” display, press the Exe- From the “CALIBRATION” display, press the Exe- cute button. The display now reads “XXX CHECK”. cute button. The display now reads “XXX CHECK”. Press Function button until the display reads “CAL Press Function button until the display reads “CAL SETTINGS“.
The calibration/cal check lock-out allows you to The calibration/cal check lock-out allows you to prevent usage of your FC20 if it is not calibrated prevent usage of your FC20 if it is not calibrated or cal checked in a specified time period.
Press the +/- buttons to enter the number of days Press the +/- buttons to enter the number of days until you require the next cal check of your FC20. until you require the next cal check of your FC20.
Wet Bath Calibration Wet Bath Calibration SIMULATOR SET-UP SIMULATOR SET-UP Pour a bottle of alcohol solution into the simulator Pour a bottle of alcohol solution into the simulator glass jar, tighten lid securely. glass jar, tighten lid securely. Turn on the simulator. Turn on the simulator.
Wet Bath Calibration Wet Bath Calibration CALIBRATION (Simulator) CALIBRATION (Simulator) Turn the FC20 ON. Attach a mouthpiece to the Turn the FC20 ON. Attach a mouthpiece to the back of the unit. back of the unit. Verify the “Cal Standard” is set to the concentra- Verify the “Cal Standard”...
Wet Bath Calibration Wet Bath Calibration CALIBRATION CHECK (Wet Check) CALIBRATION CHECK (Wet Check) Turn the FC20 ON. Attach a mouthpiece to the Turn the FC20 ON. Attach a mouthpiece to the back of the unit. back of the unit.
Dry Gas Calibration Dry Gas Calibration DRY GAS SET-UP DRY GAS SET-UP Screw the regulator onto the dry gas tank. Screw the regulator onto the dry gas tank. Attach the mouthpiece adapter to the outlet port Attach the mouthpiece adapter to the outlet port on the regulator.
Verify the “Standard Type” is set to Dry Gas. Verify the “Standard Type” is set to Dry Gas. Turn FC20 on. Attach a mouthpiece to the back of Turn FC20 on. Attach a mouthpiece to the back of the unit.
Verify the Standard Type is set to Dry Gas. Verify the Standard Type is set to Dry Gas. Turn FC20 ON. Attach a mouthpiece to the back of Turn FC20 ON. Attach a mouthpiece to the back of the unit.
BATTERIES BATTERIES The 4 AA batteries in your FC20 should last for The 4 AA batteries in your FC20 should last for about 160 hours of “on” time which can equate to about 160 hours of “on” time which can equate to as many as 6000 to 8000 tests.
Data Download, with DataTrak™ you can Data Download, with DataTrak™ you can download any or all the tests stored in the FC20 in download any or all the tests stored in the FC20 in a comma delimited text format for easy import a comma delimited text format for easy import into most spreadsheet or datbase programs.
Low Battery Battery voltage is too low to take a test. Replace batteries. Replace batteries. Low Li Battery The internal clock battery is low. Contact Lifeloc Low Li Battery The internal clock battery is low. Contact Lifeloc support. support. Pump Failure or Pump The pump needs reset.
FACTORY LIMITED WARRANTY ON NEW UNITS FACTORY LIMITED WARRANTY ON NEW UNITS The FC20 comes with a one year limited parts and The FC20 comes with a one year limited parts and labor warranty, effective on the date of purchase labor warranty, effective on the date of purchase by the end-user.
Notice Notice The FC20 is a professional device designed to be The FC20 is a professional device designed to be used by trained operators in conjunction with a used by trained operators in conjunction with a specified, periodic maintenance and calibration/ specified, periodic maintenance and calibration/ calibration check regimen.
Page 52
! W W W . L I F E L O C . C O M N T H E N T H E LIFELOC SALES LIFELOC SALES All Lifeloc products,, including All Lifeloc products,, including To receive a pricelist or To receive a pricelist or mouthpieces, calibration equip-...
Need help?
Do you have a question about the FC20 and is the answer not in the manual?
Questions and answers