Using Security Password; Removing Security Password - Lifeloc FC10Plus Operation Manual

Lifeloc FC10

Using Security Password

For access to Calibration, Calibration Check, Calibration Settings or User Settings.
Press the Function button until the display reads "CALIBRATION" or "SETTINGS". Select
the one you would like to access. You are limited to one at a time.
Press the Execute button. Display reads "SECURITY CODE".
Enter your password using the + or - buttons. Use the Execute button to move to the next
digit.
Press the Function button to gain access. You now have access to all menus and settings.

Removing Security Password

Press the Function button until the display reads "SETTINGS".
Press the Execute button. Display reads "SECURITY CODE".
Enter your password using the + or - buttons.
Press the Function button until the display reads "SECURITY SETTING".
Press the Execute button. Display reads "SECURITY SETTING" and shows your password
in the lower left corner.
Clear your password using the + or - buttons to change the letters or numbers to blank
spaces. Use the Execute button to move to the next digit.
Press the Function button to clear the password.
Momentarily press Power to return to the testing mode.
Plus
www.Lifeloc.com
User Settings
| 303-431-9500
15