Lamp Indicator - Dukane 6752WU User Manual

Lamp Indicator

Indicator display
Off
Flash- Green
ing
Red
Red (cycles
of 6)
Lit Red
Green
Temp. Indicator
Indicator display
Off
Flash- Red (cycles
ing of 2)
Lit Orange
If the temperature protector is activated
If the projector's internal temperature rises abnormally, the lamp turns off and the temperature indicator flashes (re-
peatedly in cycles of 2).
It may happen that the projector's temperature protector is simultaneously activated and the projector's power turns
off.
If this happens, do the following:
- Unplug the power cord from the power outlet.
- If using in a place where the surrounding temperature is high, move the projector to a different, cool place.
- If there is dust in the ventilation holes, clean. (→ pages
- Wait as such about 1 hour for the projector's internal temperature to lower.
Projector status
The lamp is turned off.
Preparing to relight lamp
after lighting has failed
Lamp replacement grace
period
Lamp does not light
Lamp usage time exceeded
Lamp lit
Projector status
No problem
Temperature problem
High surrounding tempera-
ture
–
Wait a while.
The lamp has reached the end of its service life and is
now in the replacement grace period (100 hours). Re-
place the lamp as soon as possible. (→ page 178)
The lamp has not turned on. Wait at least 1 minute, then
turn the power back on. If the lamp still does not light,
contact an Dukane Service Department.
The lamp has exceeded its usage time. The projector's
power cannot be turned on until the lamp is replaced.
(→ page 178)
–
The temperature protector has been activated. If the
room temperature is high, move the projector to a cool
place. If the problem still persists, contact Dukane
Service Departmant.
The surrounding temperature is high. Lower the room
temperature.
174 and 177)
271
10. Appendix
Procedure
Procedure