Setting The Overlap Of Projection Screens - Dukane 6752WU User Manual

Preparation:
• Turn on the projector and display a signal.
• When performing settings or adjustments using the remote control, enable the [CONTROL ID] so as not to activate
the other projectors. (→ page 120)

Setting the overlap of projection screens

① Enable [EDGE BLENDING].
1 Press the "Edge Blend." button.
The [EDGE BLENDING] screen will be displayed. Align the cursor with [MODE] and then press the ENTER button.
The mode screen will be displayed.
2 Select [MODE] → [ON] and press the ENTER button.
This enables the Edge Blending function. The following menu items are available:
[TOP], [BOTTOM], [LEFT], [RIGHT], and [BLACK LEVEL]
3 Select [RIGHT] for Projector A and [LEFT] for Projector B.
Press the ENTER button.
The following items are available:
[CONTROL], [MARKER], [RANGE], and [POSITION]
72
4. Multi-Screen Projection