❹ Menu Descriptions & Functions [Input] - Dukane 6752WU User Manual

❹ Menu Descriptions & Functions [INPUT]
* This screen belongs to a HDBaseT model.
1:HDMI1
This projects the video of the device connected to the HDMI 1 IN terminal.
2:HDMI2
This projects the video of the device connected to the HDMI 2 IN terminal.
3:DisplayPort
This projects the video of the device connected to the Display Port input terminal.
4:BNC
This projects the video of the device connected to the video input terminal.
(This projects the analog RGB signal or component signal.)
5:BNC(CV)
This projects the video of the device connected to the BNC (CV) video input terminal.
(This projects the composite video signal.)
6:BNC(Y/C)
This projects the video of the device connected to the BNC (Y/C) video input terminal.
(This projects the S-video signal.)
7:COMPUTER
This projects the video of the device connected to the computer video input terminal.
(This projects the analog RGB signal or component signal.)
8:HDBaseT*
1
Projecting the HDBaseT or WIRED LAN signal.
8:ETHERNET*
2
Switch to the data display that is sent from the network.
9:USB-A*
2
Switch to the data display (viewer display) of the USB memory that has been set up in the projector. (→ page 225)
ENTRY LIST
Displays a list of signals. See the following pages.
TEST PATTERN
Closes the menu and switches to the test pattern screen.
*1 Only HDBaseT models will be displayed.
*2 Only MM models will be displayed.
85
5. Using On-Screen Menu