About The Projector's [Network Settings] - Dukane 6752WU User Manual

About the Projector's [NETWORK SETTINGS]

"NETWORK SETTINGS" need to be carried out when connecting this projector to a wired or wireless LAN.
For [HDBaseT Models]
Please configure the projector using the following "1. NETWORK SETTINGS". "2. NETWORK SETTINGS (MM)" can-
not be used.
For [MM Models]
The following two types of [NETWORK SETTINGS] 1 and 2 can be used. Use the [NETWORK SETTINGS] 1 and 2
for different purposes depending on the software and function described in the table below.
1. "NETWORK SETTINGS" under [SETUP] in the on-screen menu (→ Page 122)
Or "NETWORK SETTINGS" in the HTTP server (→ Page 48)
2. "NETWORK SETTINGS (MM)" in the application menu (→ Page 140)
Or "NETWORK SETTINGS" in the HTTP server (MM) (→ Page 51)
Wired LAN
Wireless LAN
Main uses
Function
User Supportware
* A wireless LAN unit sold separately is required to connect the projector to a wireless LAN.
1. NETWORK SETTINGS
OK
Not OK
Projector control
• PC control
• PJLink
• AMX BEACON
• CRESTRON
• ALERT MAIL
• HTTP server (PROJECTOR ADJUST-
MENT)
• Synchronize with an Internet time server
• PC Control Utility Pro 4
• PC Control Utility Pro 5
• Virtual Remote Tool
2. NETWORK SETTINGS (MM)
• Shared folder (viewer)
• Media Server (viewer)
• Network Projector
• Remote Desktop
• Image Express Utility Lite
• Image Express Utility 2.0
• Desktop Control Utility 1.0
6
1. Introduction
OK
OK*
Transmission of images