Table of Contents
Advertisement
6.1
Maintenance
To clean Fresnel, cover glass and mirror.
1.
Press stage catch.
2.
Lift and swing stage over.
3-
Remove Fresnel (4 screws).
4.
Clean with dry, lint-free cloth.
5.
Shipping brackets do not need to be replaced if the Fresnel
is removed for cleaning.
See below.
6.2
Lamp Replacement
CAUTION:
Glass components may shatter. Cover glass parts
with cloth. Protect eyes.
Handle carefully.
Allow the lamp to cool before removing it.
Your projector uses:
641A, 653A, 663—360W, ENX.
640, 4000/4003/4300/5500—410W, FXL.
TO REMOVE:
1.
Remove the defective lamp by pulling up and pushing back
the lamp ejection lever.
2.
Before inserting a new lamp, move the ejection lever back
to its original position.
6
Advertisement
Table of Contents
