Dukane 6752WU User Manual page 65

NETWORK SETTINGS (MM Models)
http://<IP Address of Projector (MM)>/index.html
• SETTINGS
WIRED or WIRELESS
SETTING
APPLY
DISABLE
PROFILE 1/PROFILE 2
DHCP ON
DHCP OFF
IP ADDRESS
SUBNET MASK
GATEWAY
WINS
AUTO DNS ON
AUTO DNS OFF
Setting for WIRELESS LAN (the optional Wireless LAN Unit required)
EASY CONNECTION
SIMPLE ACCES POINT
WPS
CHANNEL
SSID
Set for wired LAN or for wireless LAN.
Apply your settings to wired LAN or wireless LAN.
Turn off wired LAN connection
Two settings can be set for wired LAN connection. Select PROFILE 1 or PROFILE 2.
Automatically assign IP address, subnet mask, and gateway to the projector from your
DHCP server.
Set IP address, subnet mask, and gateway to the projector assigned by your network
administrator.
Set your IP address of the network connected to the projector.
Set your subnet mask number of the network connected to the projector.
Set the default gateway of the network connected to the projector.
Set the IP address of your WINS server of the network connected to the projector when
[DHCP] is turned on, this option is not available.
DHCP server will automatically assign IP address of DNS server connected to the
projector.
Set your IP address of DNS server connected to the projector.
Execute a wireless LAN using EASY CONNECTION.
Set the projector for simple access point.
Use WPS (Wi-Fi Protected Setup™) to set up the wireless LAN for the projector.
NOTE:
• Use the projector's menus to make WPS connections and change the WPS profile settings.
Select a channel. Available channels vary depending on the country and region. When
you select [INFRASTRUCTURE], make sure that the projector and your access point
are on the same channel; when you select [AD HOC], make sure that the projector and
your computer are on the same channel.
Enter an identifier (SSID) for wireless LAN. Communication can be done only with
equipment whose SSID matches SSID for your wireless LAN.
51
3. Convenient Features