Utility Commands - Rigol DM3000 Series Programming Manual

RIGOL

Utility Commands

The commands are used to set communication control and self-inspection. Before
controlling communication, please make sure that communication interface has been
connected stably, otherwise it possiblely to be abnormal or wrong.
The commands mainly include:
:utility:interface:LAN:dhcp

:utility:interface:LAN:host

:utility:interface:LAN:domain

:utility:interface:LAN:ip

:utility:interface:LAN:mask

:utility:interface:LAN:gateway

:utility:interface:LAN:dns

:utility:interface:GPIB:address

:utility:interface:RS232:baud

:utility:interface:RS232:parity

2-54
Programming Guide for DM3000 Series
© 2008 RIGOL Technologies, Inc.