Agilent Commands - Rigol DM3000 Series Programming Manual

RIGOL

Agilent Commands

The following table lists the commands of Agilent supported byRIGOL DM3000 series
digital multimeter.
Before using the commands, to send CMDSET command, that is: CMDSET□AGILENT.
For the details, please refer to the "Commands Introduction" in page 1-5.
CALCulate :AVERage
:DB
:DBM
:FUNCtion
:FUNCtion?
:LIMit
:NULL
CONFigure ?
:CAPacitance
:CONTinuity
:CURRent
:DIODe
:FREQuency
:FRESistance
:PERiod
3-2
Agilent SCPI Commands
:AVERage?
:CLEar
:COUNt?
:MAXimum?
:MINimum?
:PTPeak?
:SDEViation?
:REFerence
:REFerence?
:REFerence
:REFerence?
:LOWer
:LOWer?
:UPPer
:UPPer?
:OFFSet
:OFFSet?
:AC
[:DC]
Programming Guide for DM3000 Series
© 2008 RIGOL Technologies, Inc.