Samsung DS 616 User Manual page 24

COMMON BELL CONTROL
The system is equipped with one programmable relay. This relay provides a dry
contact pair to control a customer-provided bell or common audible device. This
contact must be programmed as a member of a station group and may provide
steady or interrupted closure.
CONFERENCE
The system allows six simultaneous conferences.
ADD-ON (5 PARTY)
Any combination of up to five parties (stations or outside lines) can be joined to-
gether in an add-on conference. Parties may be eliminated or added after a confer-
ence has been established.
UNSUPERVISED
A station user may set up a conference with two or more outside lines and then exit
the conference leaving the outside lines connected in an unsupervised (trunk to
trunk) conference.
DATA SECURITY
Single line extensions used with modems and facsimile machines can be pro-
grammed so that they will not receive any system-generated tones that would dis-
rupt data transmissions. In addition, these devices receive DS 616 C.O. ringing
pattern instead of intercom ring pattern. Devices connected to an SLI card receive
a disconnect signal upon termination.
DATABASE PRINTOUT
A copy of the customer database can be obtained by using PCMMC. This informa-
tion can be directed to a printer or the PC screen and may be done either on-site or
remotely. A complete database or specific data blocks may be obtained.
DAY/NIGHT RING ASSIGNMENTS
Each C.O. line may be programmed to ring selected stations during day operation
and different stations when the system is placed in night service.
DIL TO A HUNT GROUP
Lines may be programmed as direct in lines (DIL) to a station hunt group. For
example, service parts or sales lines can ring directly to the designated depart-
ments for immediate answer.
DIRECT INWARD SYSTEM ACCESS (DISA)
Users can call in on specific DISA lines at any time, input a security code and re-
ceive system dial tone. Users can now place internal calls or if permitted, calls
using C.O. lines. The caller must have a tone dial phone and know his/her DISA
security code. DISA lines can be used as both way lines or incoming only and may
4.8