Call Pickup; Chain Dialing - Samsung DS 616 User Manual

for the user to proceed to that station or allows the party that the call was intended
for to have that call placed at their station. The call or trunk button will flash at the
remote hold station.
CALL PARK AND PAGE
Each C.O. line has its own park zone. This simple method eliminates confusion
and ensures that a park zone is always available. Pressing the PAGE key parks the
call automatically. There are no extra buttons to press and there is no lost time
looking for a free zone.

CALL PICKUP

DIRECTED
With directed call pickup, users can answer calls ringing at any station by dialing a
code plus that station's extension number or by pressing the feature button and
then dialing the extension.
GROUPS (8)
In addition, calls can be picked up from a station group in a similar manner. The
group pickup feature allows users to answer any call ringing within any pickup
group. There are 8 pickup groups available. A station cannot be in more than one
pickup group. To use this feature, station users either dial the access code or press
the assigned feature button followed by the pickup group number.
CALL WAITING/CAMP-ON
Busy stations are notified that a call is waiting (camped-on) when they receive a
tone. The tone is repeated at a programmable interval. Keysets receive an off-hook
ring signal through the speaker and single line stations receive a tone in the hand-
set. The volume of the camp-on tone can be set by the station user. Camped-on
calls follow Forward No Answer if a Forward No Answer destination has been set.
CENTREX/PBX USE
CENTREX and PBX lines can be installed in lieu of central office trunks. CENTREX
and PBX feature access codes including the command for hook-flash (FLASH) can
be stored under one touch buttons. Toll restriction programming can ignore PBX or
CENTREX access codes so that toll calls can be controlled when using these ser-
vices.

CHAIN DIALING

Keyset users may manually dial additional digits following a speed dial call or
chain together as many speed dial numbers as are required.
CLASS OF SERVICE (Day/Night)
The system allows a maximum of 10 station classes of service. Each class of ser-
vice can be customized in memory to allow or deny access to features and to de-
fine a station's dialing class. Each station can be assigned different classes of
service for day and night operation.
4.7