Using And Caring For Your Cooktop; Using The Surface Units - KitchenAid KERC507 Use And Care Manual

U
sing and Caring for Your
Cooktop

Using the surface units

Control knobs
Push in control knobs before turning them
to a setting. Set them anywhere between HI
and OFF.
Power On lights
Each control knob has a Power On Light.
When you use a control knob to
turn on a surface unit, the Power
On Light by that knob will glow.
Hot surface indicator lights
(Ceramic glass cooktop models only)
The Hot Surface Indicator Lights on the
cooktop surface will glow
when the surface units get hot.
The Indicator Lights will
HOT CHAUD
continue to glow as long as
the surface units are too hot
to touch, even after they are
("CHAUD" is
turned off.
French for
"HOT")
wWARNING
Fire Hazard
Turn off all controls when done
cooking.
Failure to do so can result in death
or fire.
Control setting guide
For best results, start cooking at the high
setting; then turn the control knob down to
continue cooking.
SETTING RECOMMENDED USE
• To start food cooking.
HI or
• To bring liquid to a boil.
MAX
MED-HI • To hold a rapid boil.
or 6-8 • To quickly brown or sear
meat.
MED • To maintain a slow boil.
or 5 • To fry poultry or meat.
• To make pudding, sauce,
or gravy.
MED-LO • To stew or steam food.
or 2-4 • To simmer food.
• To keep food warm. Set the
LO or 1
heat higher or lower within
the LO (or 1) band to keep
food at the temperature
you want.
• To maintain liquid just below
simmer.
• To melt chocolate or butter.
9