Oven Lights; Resetting Circuit Breakers - KitchenAid KERC507 Use And Care Manual

Oven light(s)
Your oven may have a one or two standard
oven lights on the back wall or two halogen
lights on the sides. The oven light(s) will
come on when you open the oven door. To
turn light(s) on when oven door is closed,
press OVEN LIGHT pad on control panel.
Press pad again to turn off the light(s).
NOTES:
• The oven light(s) will not work during the
Self-Cleaning cycle.
• Make sure oven is cool before replacing
light bulb.
Replacing standard oven light(s)
located on back wall:
1. Unplug range or disconnect power.
2. Turn glass bulb cover counter-clockwise
to remove.
3. Remove light bulb from socket. Replace
light bulb with a 40-watt appliance bulb.
4. Replace bulb cover by screwing it in
clockwise.
5. Plug in range or reconnect power.

Resetting circuit breakers

(some models)
The breakers on your range are located
under the lamp cover, which you can lift by
the front edge at both ends for access.
Push button on top of breaker to reset for
outlet use.
U
sing and Caring for Your Oven
Replacing halogen oven lights
located on each side of oven:
1. Unplug range or disconnect power.
2. Remove glass light cover by grasping
front edge of cover and pulling it away
from side wall of oven.
3. Remove light bulb from socket. Replace
with 12-volt, 5-watt maximum, halogen
bulb available at most hardware stores.
4. Replace light cover by snapping cover
back into oven wall.
5. Plug in range or reconnect power.
47