Using And Caring For Your Cooktop; Using The Surface Units - KitchenAid KERI500 Use And Care Manual

(71
° sing and Caring for Your
Cooktop
Using the surface units
Control knobs
Push in control knobs before turning them
to a setting. Set them anywhere between
HI and OFF.
Power On lights
Each control knob has a Power On Light.
When you use a control knob to
turn on a surface unit, the Power
On Light by that knob will glow.
("CHAUD" is
French for
"HOT")
Hot surface indicator lights
(Ceramic glass cooktop models only)
The Hot Surface Indicator Lights on the
cooktop surface will glow
when the surface units get
hot. The Indicator Lights will
continue to glow as long as
the surface units are too hot
to touch, even after they
are turned off.
Fire Hazard
Turn off all controls when done
cooking.
Failure to do so can result in death
or fire.
Control setting guide
For best results, start cooking at the high
setting; then turn the control knob down to
continue cooking.
SETTING RECOMMENDED USE
HI or • To start food cooking.
MAX • To bring liquid to a boil.
MED-HI • To hold a rapid boil.
or 6-8 • To quickly brown or sear
meat.
MED • To maintain a slow boil.
or 5 • To fry poultry or meat.
• To make pudding, sauce,
or gravy.
MED-LO • To stew or steam food.
or 2-4 • To simmer food.
LO or I • To keep food warm. Set the
heat higher or lower within
the LO (or 1) band to keep
food at the temperature
you want.
• To maintain liquid just below
simmer.
• To melt chocolate or butter.
9