Window Installation-Prepare The Cabinet - Whirlpool ROOM AIR CONDITIONER Use & Care Manual

Attach Top Channel
NOTE: Attach the top channel and the side curtains to the air
conditioner cabinet before placing the cabinet in the window.
1. Locate the bag of screws provided.
2. Attach the top channel seal to the bottom of the top channel.
3. Place the top channel on top of the air conditioner cabinet,
lining up the 5 holes in the top channel with the 5 holes on top
of the air conditioner cabinet.
4. Using five ¹⁄₄" screws, attach the top channel to the air
conditioner cabinet.
¹⁄₄
A.
B. Top channel
Attach Side Curtains
NOTE: Attach curtains to the air conditioner cabinet before
placing the air conditioner cabinet in the window.
1. Insert the top and then the bottom of the right-hand curtain
housing in the top and bottom curtain guides on the air
conditioner cabinet.
Back view
A
A. Curtain housing
B. Curtain guides
Window Installation—Prepare the Cabinet
A
B
" screws
B
Bottom view
A
A. Curtain housing
B. Curtain guides
2. Extend the right-hand curtain outward so you may insert a ¹⁄₄"
screw through the top hole in the curtain. Using a ¹⁄₄" screw,
screw the curtain to the top hole in the air conditioner
cabinet.
NOTE: This screw is required to correctly attach the curtain
(top to bottom) to the air conditioner cabinet.
3. While the right-hand curtain is still extended, insert ¹⁄₄" screws
through the other three holes in the curtain. Screw the curtain
to all four holes in the air conditioner cabinet.
4. Slide the curtain housing into the curtain guides as far as it
will go.
5. Repeat the above steps for the left-hand curtain.
B
7