Whirlpool ROOM AIR CONDITIONER Use & Care Manual page 10

2. Align holes in the bottom of the air conditioner cabinet with
holes in the bracket assembly.
3. Use three ¹⁄₄" screws to attach the air conditioner cabinet to
bracket assembly.
4. Repeat steps 2 and 3 to attach the other side of the air
conditioner cabinet to the bracket assembly.
5. Check that air conditioner cabinet is tilted to the outside so
that water will run to the outside. If needed, adjust the
leveling leg.
Attach Side Curtains to Window
1. Pull the left-hand curtain out until it fits into the window
channel.
2. Use ¹⁄₈" drill bit to drill a starter hole through the hole in the
side curtain and window sash.
3. Insert one of the ³⁄₄" screws through the left-hand curtain and
into the window sash.
4. Repeat for the right-hand curtain.
Window Sash View
A
B
C
A. Window sash
B. Hole in side curtain
10
³⁄₄
C. " screw
5. Use ¹⁄₈" drill bit to drill a starter hole through the hole in the
shutter clamp and windowsill.
6. Insert one of the ³⁄₄" screws through the hole in the side
curtain clamp and into the windowsill.
7. Repeat for right-hand curtain.
Windowsill View
A
B
C
A. Side curtain
³⁄₄
B. " screw
Complete Window Installation
Insert foam seal behind the top of the lower window sash and
against the glass of the upper window.
A
A. Top of lower window sash
B. Foam seal
C. Side curtain clamp
B