Audio; Figure 29 Camera Ptz Setup Screen - ADT 4-Channel User Manual

User's Manual
Figure 29 Camera PTZ setup screen.
You can assign IDs to each camera by highlighting the box under the ID heading and pressing the
button. Change the number by highlighting it and using the Up and Down arrow buttons to
increase and decrease the number. The PTZ ID number can be set from 0 to 256.
Highlight the Setup... box and press the

Audio

Highlight Audio in the Devices menu and press the
32
Highlight the box in the Product column for the PTZ camera you wish
to configure and press the
Select your camera from the list and press the
to connect the camera to the RS232 or RS485 connector on the back
of the DVR following the camera manufacturer's instructions.
button. The Port Setup window appears.
Configure the port's setting based on the PTZ camera manufacturer's
instructions.
NOTE: You will only be able to set up PTZ
devices if the PTZ port is set to RS232 or
RS485.
button. A list of PTZ devices appears.
button. The Audio setup screen appears.
button. You will need