Date/Time; Figure 10 Date/Time Setup Screen - ADT 4-Channel User Manual

User's Manual
Highlighting Clear All Data... and pressing the
asked to verify that you wish to clear all data before the DVR erases the video data. Clear All
Data... will not clear the System Log.

Date/Time

Highlight Date/Time in the System menu and press the
appears.
Figure 10 Date/Time setup screen.
Highlight the first box beside Time and press the
will highlight. Use the Up and Down arrow buttons to change the number. Use the Left and Right
arrow buttons to move between hour, minutes and seconds. Once you have the correct time, press
the button.
Highlight the Format box beside Time and press the
time formats and press the
NOTE: The clock will not start running until you have highlighted Save and pressed the
button.
Highlight the box beside Time Zone and press the
and press the button.
NOTE: The Time Zone can also be selected on the map below by pressing the Left and Right
buttons or scrolling the mouse wheel up and down.
Highlight Enable Daylight Saving Time and press the
between On and Off.
Highlight the Holiday tab, and the Holiday setup screen appears.
16
Highlight the first box beside Date and press
the
date will highlight. Use the Up and Down
arrow buttons to change the number. Use the
Left and Right arrow buttons to move between
month, date and year. Once you have the correct
date, press the
Highlight the Format box beside Date and press
the
date formats and press the
selected format.
button to save your selected format.
button will clear all video data. You will be
button. The Date/Time setup screen
button. The individual sections of the
button.
button. Select from the three available
button. The individual sections of the time
button. Select from the three available
button. Select your time zone from the list
button. Pressing the
button to save your
button toggles