Chapter 2 Installation; Package Contents; Required Installation Tools; Video Input - ADT 4-Channel User Manual

Chapter 2 Installation

Package Contents

The package contains the following:
y Digital Video Recorder
y Power Adaptor and Power Cord
y User's Manual (This Document)
y RAS Software CD and User's Manual
y USB Mouse
y Infrared Remote Control

Required Installation Tools

No special tools are required to install the DVR. Refer to the installation manuals for the other
items that make up part of your system.

Video Input

Factory Reset Switch
Alarm Input/Output
Power Cord Connector
Your DVR can be used with either NTSC or PAL equipment.
NOTE: You cannot mix NTSC and PAL equipment. For example you cannot use a PAL
camera and an NTSC monitor.
Video Input
Figure 2 DVR rear panel.
Video Loop Through
Video Out
RS485 Port
Connect the coaxial cables from the video sources to the BNC Video
In connectors.
4-Channel Digital Video Recorder
Audio In/Out
Network Port
RS232 Port
3