Pre-Event - ADT 4-Channel User Manual

User's Manual
Highlight the box under the Mode heading and press the
that will be used. Choose from: No Record, Time, Event and Time & Event.
When the DVR is in the No Record mode, it will not record during the preset day and time range
as long as the
PANIC
the DVR to record during certain times.
When the DVR is in the Time mode, the
The DVR will record and displays the
scheduled times.
When the DVR is in the Event mode, the red
The DVR will record and displays the
occurs. When the DVR is in the Pre-Event recoding mode, the yellow
there is no event, and the DVR is not recording. When the DVR is in the Pre-Event mode, the
red and display when any event occurs and the DVR starts recoding.
When the DVR is in the Time & Event mode, the DVR will follow the Time settings and the
icon displays. The DVR follows the Event settings and the
Highlight the box under the Channels heading and press the
will be recorded.
Highlight the box under the Settings heading and press the
You can set the ips and Quality of the recording. If you do not set the ips and Quality in the
Settings column, the DVR will follow the default settings. See below for details.
NOTE: Day, Range and Channels that are not defined will use the setting values of the
previous schedule item.
NOTE: When more than two schedule items are registered in the same day and time range,
the DVR will follow the latest registered schedule item.
Highlight the box under the
You will be asked to confirm that you want to delete the settings.
Highlight Default... and press the
Highlighting boxes under Quality and pressing the
quality for Time and Event recording. You can select from: Very High, High, Standard and
Basic.
Pre
-Event
Highlight Pre-Event in the Record menu and press the
appears. If you do not have Event set up in the Record Schedule, a message will display alerting
you to this fact.
38
button is not pressed. Use the No Record mode when you do NOT want
icon at the top-left corner of the screen when any event
heading and press the
button. The Default screen appears.
Highlighting boxes under ips and pressing the
to set the images per second for Time and Event recording. You can
select from 0.10 to 30.0 images per second.
button to change the recording mode
icon displays at the top-left corner of the screen.
icon at the top-left corner of the screen during the
icon displays at the top-left corner of the screen.
button to define the recording settings.
button to delete the recording settings.
button allows you to set the recorded image
button, and the Pre-Event setup screen
icon displays when
icon displays.
button to select which cameras
button allows you