ADT 4-Channel User Manual page 62

User's Manual
y
y
y
Once you have set the date and time you want, press the
the button. The selected date and time will display. (If no video was recorded during the selected
time, a message appears alerting you that no image was recorded at that time.) The
arrow buttons can now be used to review the surrounding video.
Export
Selecting (Export) in the Search menu displays the following Export menu. See the following
Clip Copy section for details.
y
A–B Clip-Copy: Selecting A–B Clip-Copy will set the starting point of the video
to be clip copied, and the
Selecting A–B Clip-Copy again will set the ending point of the video to be clip
copied and displays the Clip-Copy screen.
y
Clip-Copy: Select Clip-Copy, and the Clip-Copy screen appears to allow clip
copy setup.
Camera Menu
Selecting (Camera Menu) in the Search menu displays the following Camera Menu.
y
y
Audio: Selecting Audio toggles audio playback On and Off. Recorded audio will be played
when the DVR displays a camera with recorded audio in full screen mode.
y
Enable De-Interlace: Selecting Enable De-Interlace turns the de-interlace filters on.
NOTE: The video signal has a time difference of 1/60 second (1/50 second for PAL) between
odd and even fields because it is composed of 60 interlaced fields per second (50 fields
for PAL). When recording video with Very High (D1) resolution, video is made up of frame
units combining two fields – one odd field and one even field. This can cause horizontal
scan lines or flashes in areas with motion because of the time difference between the
two fields. Turning on the de-interlace filter provides clearer video by eliminating these
horizontal scan lines and flashes.
NOTE: The Camera Menu also can be displayed by clicking the right mouse button on the
screen while in the search mode.
54
Go to the First: Selecting Go to the First displays the first recorded image.
Go to the Last: Selecting Go to the Last displays the last recorded image.
Go to the Date/Time: Selecting Go to the Date/Time displays the Go to
the Date/Time screen.
Move the cursor over the date and time and press the
button. You can use the Left and Right arrow buttons to highlight the
year, month, day, hours, minutes and seconds. Use the Up and Down
arrow buttons to change to the date and time you want to search for video.
Zoom: Selecting Zoom and choosing the camera number zooms the current
playback image of the selected camera on the screen. It is the same as pressing
button on the front panel. Selecting Zoom again exits the Zoom
the
ZOOM
mode.
button. Then highlight Go and press
icon displays at the bottom-left corner of the screen.
(Play/Pause)
button and