Figure 26 Notification Mail Setup Screen - ADT 4-Channel User Manual

User's Manual
Highlight the box beside Retry and enter the number of times you would like the DVR to try
contacting the computer. You can select from 1 to 10 retries.
Highlight the Mail tab, and the Mail setup screen displays.
Figure 26 Notification Mail setup screen.
Highlight the second box under Recipient and press the
and listed SMTP mail server providers.
NOTE: The e-mail address must include the "@" character to be a valid address.
The Mail accounts can be deleted by highlighting the
Highlight SMTP Setup... and press the
NOTE: You will need to get the IP Address or domain name of the SMTP Server from your
network administrator.
NOTE: You can use the domain name instead of IP address if you already set up the DNS
Server when setting up the LAN.
Highlight the box beside Port and press the
Server port number obtained from your system administrator. The default port number is 25.
Highlight Enable SSL/TLS and press the
On, the DVR can send an email via an SMTP server requiring SSL (Secure Sockets Layer)
authentication.
30
Highlight the first box under Recipient and press the
virtual keyboard appears that you can use to enter the recipient's
e-mail address.
button. The SMTP Setup screen appears.
Highlight the box beside Type and press the
You can select between Manual and listed SMTP mail
server providers.
Highlight the box beside SMTP Server and press the
button. A virtual keyboard appears that you can use to
enter the IP address or domain name of the SMTP server.
button. Use the arrow buttons to enter the SMTP
button to toggle between On and Off. When it is
The DVR can be set up to send an email when
an event occurs. The Mail account can be turned
On or Off by highlighting the boxes under the
No. heading and pressing the
Highlight the + and press the
a mail recipient.
button. You can select between Manual
beside the account and pressing the
button.
button to add
button. A
button.
button.