ADT 4-Channel User Manual page 71

Computer system requirements for using the WebGuard program are:
y Operating System: Microsoft
Vista x86 (32 Bit) (Service Pack 1) or Microsoft
y CPU: Intel Pentium III (Celeron) 600MHz or faster
y RAM: 128MB or higher
VGA: 8MB or higher (1024x768, 24bpp or higher)
y
y Internet Explorer: Version 6.0 or later
Start Internet Explorer on your local PC. You can run the WebGuard program by entering the
following information in the address field.
"http://IP address:port number" (The DVR IP address and the WebGuard port number (default:
–
12088) set in the Network setup screen (WebGuard tab))
Or, "http://DVRNS server address/DVR name" (The DVRNS server address and the DVR name
–
registered on the DVRNS server)
Or, "http://www.dvronline.net" (Entering the DVR IP address or the DVR name will be required
–
when logging in)
NOTE: You will need to get the appropriate IP address for the DVR you want to connect to
and the WebGuard port number from your network administrator.
NOTE: WebGuard only works with Microsoft Internet Explorer and will NOT work with other
browsers.
You will need to enter the DVR IP address in the DVR ADDRESS field when running the
WebGuard program by entering http://www.dvronline.net. Selecting the Use DVRNS option
allows you to enter the DVR name registered on the DVRNS server instead of the IP address.
You must enter the DVRNS server address and port number in the SETUP setting when selecting
the Use DVRNS option.
NOTE: Do NOT close the LOGIN window during the WebGuard operation, otherwise, it will
cause a script error when switching between Web monitoring and Web search modes and
running the WebGuard program again will be required.
NOTE: When running the updated WebGuard for the first time, Internet Explorer might
occasionally load the information of the previous version. In this case, delete the temporary
internet files by selecting Tools Æ Internet Options Æ General tab, and then run WebGuard
again.
NOTE: There might be a problem that the bottom of WebGuard page is cropped due to the
address or status bars in Microsoft Internet Explorer 7.0. In this situation, it is recommended
that websites open windows without address or status bars by changing the internet setting.
(Go to the Tools Æ Internet Options Æ Security tab Æ Click the Custom level... button Æ
Select Enable for the Allow websites to open windows without address or status bars option)
® ®
Windows XP x86 (32 Bit) (Service Pack 3), Microsoft
Select between the WEBWATCH (Web monitoring) and
WEBSEARCH (Web search) modes. Entering ID and
PASSWORD and clicking the [LOGIN] button logs in using
the selected mode.
4-Channel Digital Video Recorder
® ®
Windows 7 x86 (32 Bit)
® ®
Windows
63