Calendar Search; Clip-Copy; Figure 57 Calendar Search - ADT 4-Channel User Manual

Calendar Search

Figure 57 Calendar Search.
NOTE: The time bar is in one-hour segments. If a segment is highlighted, it means that
some video was recorded during that hour. However, it does NOT mean video was recorded
for the entire hour.
If the DVR's time and date have been reset to a time that is earlier than some recorded video, it
is possible for the DVR to have more than one video stream in the same time range. Move to
Select a Segment, and select the video stream you want to search. Refer to the Appendix – Time
Overlap for further information on searching time-overlapped video streams.
NOTE: The lower number of the Segment indicates the latest recorded video.
Once you have set the date and time you want to search, highlight Go and press the
The selected date and time will display. The
review the surrounding video.
NOTE: It is possible that no recorded image displays on the current screen. Change the
screen mode to 2x2, and you will be able to easily see the cameras that have recorded video
during target time.

Clip-Copy

Video clips can be copied on an external USB hard disk or flash drive. The copied video clips
can be viewed on computers running Microsoft Windows 98, ME, 2000, XP or Vista. Refer to
the Appendix – USB Hard Disk Drive Preparation for information on preparing the external drive
for clip copy.
Selecting A-B Clip-Copy from the Export menu in the Search menu or pressing the
button on the remote control during playback will set the starting point of the video to be clip
copied, and the icon displays at the bottom-left corner of the screen. Selecting A-B Clip-Copy
again from the Export menu in the Search menu or pressing the
the ending point of the video to be clip copied by displaying the Clip-Copy screen.
Select Clip-Copy from the Export menu in the Search menu, press the
remote control while in the Live Monitoring mode or press and hold the
than three seconds while in the Search mode, and the Clip-Copy screen appears to allow clip copy
setup.
4-Channel Digital Video Recorder
Days with recorded video display on the calendar
with white numbers. You can highlight the days
with recorded video by using the arrow buttons.
Once you have highlighted a day, press the
(Play/Pause) button to select it.
A time bar displays at the bottom of the calendar.
Hours in which video was recorded will be
highlighted with blue. You can use the Up and
Down arrow buttons to highlight the time bar.
Once the time bar is highlighted, you can select
the time by using the Left and Right arrow
buttons .
button and arrow buttons can now be used to
BACK UP
button.
BACK UP
button again will set
button on the
BACK UP
button for more
BACK UP
57