FLIR B series User Manual page 94

17 – Working with fusion
General
Before you can activate fusion, you must set up a fusion type.
How to set up a
Follow this procedure to set up a fusion type:
fusion type
82
1 Push the Setup button.
2 On the menu, select Fusion, using the joystick.
3 Push the joystick.
4 In the Fusion box, select one of the following:
Above
■
Below
■
Interval
■
Picture in Picture
■
5 Push the joystick to confirm the choice.
6 Push the Setup button.
Publ. No. 1558792 Rev. a460 – ENGLISH (EN) – July 1, 2010