Changing Regional Settings - FLIR B series User Manual

21 – Changing settings
21.2

Changing regional settings

General
On this tab you can change the following image settings:
■
■
■
■
■
■
■
Procedure
Follow this procedure to change one or more of the aforementioned settings:
108
Language
Date format (YY-MM-DD, MM/DD/YY, DD/MM/YY)
Time format (24 h or AM/PM)
Set date and time
Distance unit (meters or feet)
Temperature unit (℃ or ℉)
Video format (PAL or NTSC).
1 Push the Setup button.
2 Go to the Regional tab.
3 Select the setting that you want to change.
4 Push the joystick.
5 Move the joystick up/down to select a new value.
6 Push the Setup button to confirm the change and leave the setup mode.
Publ. No. 1558792 Rev. a460 – ENGLISH (EN) – July 1, 2010