9 – Camera parts
12
3
Zoom button
The zoom button has the following functions on live images:
■
Push to enter the zoom state.
■
Use the joystick to zoom into or out of an image.
■
Push the zoom button once again to reset to 1× zoom factor.
■
Push the A/M button, the joystick, or the Preview/Save button to
■
confirm the zoom factor and leave the zoom state.
The zoom button has the following functions on still images:
■
Zooming:
■
Push to enter the zoom state.
■
Use the joystick to zoom into or out of an image.
■
Push the zoom button once again to reset to 1× zoom factor.
■
Push the A/M button or the Preview/Save button to confirm the
■
zoom factor and leave the zoom state.
Panning:
■
Push to enter the zoom state.
■
Push the joystick to enter the pan state.
■
Use the joystick to pan over an image.
■
Push the joystick to confirm the pan position and leave the pan
■
state.
4
Stylus pen
Note: Push the stylus pen firmly into its holder when not in use.
5
Camera button
The camera button has the following functions:
On live images: Switch between the infrared camera and the digital
■
camera (IR > DC).
On live fusion images: Switch between fusion and infrared imagery.
■
Switching between fusion and infrared imagery enables you to accurately
focus the infrared image (IR > DC > fusion).
You can set up the behavior of this button under Setup.
6
Joystick
The joystick has the following functions:
In live infrared manual mode, and in still infrared mode:
■
Push up/down to adjust the level.
■
Push left/right to adjust the span.
■
In menus, in dialog boxes, and in the image archive:
■
Push up/down or left/right to navigate.
■
Push to confirm choices.
■
Publ. No. 1558792 Rev. a460 – ENGLISH (EN) – July 1, 2010