FLIR B series User Manual page 25

Publ. No. 1558792 Rev. a460 – ENGLISH (EN) – July 1, 2010
7 A/M button
The A/M button has the following functions:
Push to switch between automatic and manual adjustment modes.
■
Push and hold down for more than one second to perform a non-unifor-
■
mity correction.
In still infrared mode: Switch user focus between the documentation
■
toolbar and the temperature scale.
In still infrared mode and in recall mode: Push and hold down for more
■
than one second to perform a one-shot auto-adjust.
8 Measure button
The Measure button has the following functions:
In live infrared mode: Push to display/hide the measurement menu.
■
In still infrared mode: Push to display/hide the measurement toolbar.
■
9 Info button
The function of the Info button is to display different levels of information
on the screen.
10 Setup button
The function of the Setup button is to display/hide the setup menu. In the
setup mode you can change image settings, camera settings, and regional
settings.
11 Archive button
The Archive button has the following functions:
Push to open the image archive.
■
Push to close the image archive.
■
12 Mode button
The function of the mode button is to display/hide the mode selector.
13 On/Off button.
The On/Off button has the following functions:
To turn on the camera, push the On/Off button.
■
To turn off the camera, push and hold down the On/Off button for more
■
than 2 seconds.
To enter the standby mode, push and hold down the On/Off button for
■
approx. 0.2 seconds.
To exit the standby mode, push and hold down the On/Off button for
■
approx. 0.2 seconds.
The On/Off button is also a power indicator that shows when the camera
is on.
14 Hand strap
9 – Camera parts
13