FLIR B series User Manual page 80

16 – Working with images and folders
68
4 To save an image, push and hold down the Preview/Save button for more
than one second.
The saved image will now be displayed in the corresponding area in the
tools pane. You can also see that the left-most area on the screen shows
the image you just saved (indicated here in red):
T630365;a1
5 Using the joystick, you can now decide in which area you want to save the
next image, and then save the image by pushing the Preview/Save button.
Continue using this procedure until you have created your complete image.
6 To finish and leave this mode, push the Mode button.
Publ. No. 1558792 Rev. a460 – ENGLISH (EN) – July 1, 2010