Front Panel and Rear Panel
Front Panel
1.
OPEN/CLOSE:.
2.
STANDBY button: To turn ON/OFF the Standby Mode.
3.
USB Slot: Connect for software upgrades.
Rear Panel
1.
ANT IN: Ant In is where you connect the Antenna..
2.
LOOP OUT: Loop Out RF signal to second tuner.
3.
ETHERNET: Connect to network.
4.
OPTICAL: Digital audio output.
5.
VIDEO: VIDEO output to connect to your TV.
Audio(L/R) Outputs: Output left/right audio signal to TV or amplifier.
6.
7.
HDMI: HDMI to connect to your TV in high definition.
8.
BD USB for Update: Connect for software upgrades in Bluray mode.
9.
Y/Pb/Pr: Output Y/Pb/Pr video signal to TV (support high definition output).
Open/ close the door of DVD tray
4