Strong SRT 6500 User Manual page 42

Network
Once you have set up the Media folder on your PC follow the below instructions to
connect the receiver to your PC over your network.
To activate the Network Neighbourhood:
1. Press [MENU] key in Live TV mode.
Select Network  Network Neighborhood
2.
3. Press the Red button to insert the required PC share information

IP Address: Enter the IP address of the PC you wish to share with using
the numeric keys

Shared Name: Press the [▶] button to access the virtual keyboard to enter
the shared folder name you created on your PC. The default in this menu is
Media, we recommend the folder on the PC be named media as stated in
the PC set up instructions

User: Press the [▶] button to access the virtual keyboard to enter the User
name of the PC you are connecting to. Once you have entered the
username press the Yellow button to save

Password: Press the [▶] button to access the virtual keyboard to enter the
Password of the PC you are connecting to. Once you have entered the
password press the Blue button to save and exit
4. Press [OK] button to connect to your PC. Once connected under the "State"
heading it will display "Connect OK" If it displays Connect Fail, please follow the
above steps again and re check your Media folder settings
40