Front Panel And Rear Panel; Front Panel; Rear Panel - Strong SRT 5495T User Manual

Front Panel and Rear Panel

Front Panel

STANDBY button: To turn ON/OFF the Standby Mode.
1.
USB Slot: Connect for software upgrades.
2.
MENU: To enter the Main Menu.
3.
OK: To confirm the selected menu item.
4.
CH-/+ : To change the channel upward/downward.
5.
VOL-/+ : To control the level of the volume.
6.

Rear Panel

LOOP OUT: Loop Out RF signal to second tuner.
1.
ANT OUT: RF signal output to other reception equipment such as TV.
2.
ETHERNET: Connect to network.
3.
OPTICAL/COAXIAL Digital audio output.
4.
USB: Connect for software upgrades.
5.
HDMI: HDMI to connect to your TV in high definition.
6.
Y/Pb/Pr: Output Y/Pb/Pr video signal to TV (support high definition output).
7.
ANT IN: Ant In is where you connect the Antenna.
8.
9. LOOP IN: RF signal input to connect RF loopback cable.
10. VIDEO: VIDEO output to connect to you TV.
11. Audio(L/R) Outputs: Output left/right audio signal to TV or amplifier.
4