Strong SRT 6500 User Manual page 54

BLU- RAY PLAYER
Menu Submenu
Speaker
setup
Audio
Post-
processing
System
Software
info
version
Item
Configuration
(select according to
connected speaker and
power amplifier)
Test tone
EQ
Display software version
Setting and description
2X (configuration when two channels are
connected)
First step: select the audio channel mode
L/R: select this option if your power amplifier is
compatible with Dolby Pro Logic;
Stereo: select this option if the player is
connected to stereo power amplifier.
Second step: select the quantity of bass:
None: select this option if there is no bass
speaker;
Single: select this option if there is bass speaker.
Third step: select the speaker to be set
If the bass quantity is "None": you can select to
set left/right speaker;
If the bass quantity is "Single": in addition to the
speaker, you can also set bass speaker;
Fourth step: set the selected speaker as follows:
Size: set according to speaker size, select large if
the cross section area is larger than or equals to
16cm2, or else select small;
Tuning: adjust the audio output strength of the
speaker in the range -10~10dB.
Delay: set the distance between the speaker and
the listener by 5cm in the range 0~1000cm.
More
Size: set according to speaker size, select large if
the cross section area is larger than or equals to
16cm2, or else select small;
Tuning: adjust the audio output strength of the
speaker in the range -10~10dB.
Delay: set the distance between the speaker and
the listener by 5cm in the range 0~1000cm.
OFF
Rock
Pop
Live
Dance
Confirm after upgrading.
52