Strong SRT 6500 User Manual page 25


Press [STOP]/[EXIT] to stop playback. If a program is being recorded while
you are playing back a previously recorded program, when you press the
[STOP]/[EXIT], a dialog will be displayed on screen to allow you to select
to either stop playback or stop the recording.
Editing recorded programs
In this mode you can remove sections of the recorded program, so when
playing back, these sections will be skipped and playback will continue after the
removed section.
1. Open DVR Menu by pressing [DVR] in Live TV Mode.
2. Select the recorded program you wish to edit using the UP and Down Arrow
keys Begin playback of the selected program by pressing the OK button twice.
3. Once playback has begun press the INFO button. This will display a playback
progress banner and a number of options using the coloured buttons

Red Button-Mark A : Press the Red button during playback to set the start
position of the section to be removed. An "A" will be placed on the progress
banner.

Green Button-Mark B : Press the Green button to set the end position of
the section to be removed. A "B" will be placed on the progress banner
indicating the end of the section to be removed.

Yellow Button-Remove A-B : Press the Yellow button once you have set
the section of the recorded program to be removed. A dialog box will be
displayed asking whether you wish to remove the selected section. Select
Yes and press the OK button. The section will now be removed and will not
be viewed during playback. This section will also change colour from blue
to purple in the playback progress banner when Info button is pressed.
Should you not wish to proceed with removing this section select NO to
change the section to be cut or select Cancel to exit from this option
completely and return to normal playback.

Blue Button-Recovery : Press the Blue button should you wish to cancel
the removed section of the recorded program. This will remove the all
removed sections and program will now play in its entirety.
4. Please Note: You can remove as many sections within the recorded program as
you wish by simply following the above steps again.
23