Front Panel and Rear Panel Illustration
Front Panel
① STANDBY: To turn the standby mode ON/OFF.
② MENU: To enter the main menu. Press again to exit to previous menu.
③ OK: To confirm the selected menu item.
④ VOL+/-: To control the level of the volume.
⑤ CH+/-: To change the channel up/down.
Rear Panel
① LOOP IN: RF signal input to connect RF loopback cable.
② ANT OUT: RF signal output to other reception equipment.
③ LOOP OUT: RF signal output to connect loop in.
④ ANT IN: To connect the antenna.
⑤ USB: The port for software upgrade.
⑥ HDMI Video output used to connect to your HDMI device.
⑦ OPTICAL/COAXIAL Digital audio output.
⑧ AUDIO L/R Audio output to connect to your TV.(Used with YpbPr)
⑨ AUDIO L/R Audio output to connect to your TV.(Used with CVBS/S-VIDEO)
⑩ S-VIDEO S-VIDEO output to connect to you TV.
⑪ CVBS CVBS output to connect to your TV.
○
POWER Switch ON/OFF.
12
○
YPbPr High definition video output to connect to your TV.
13
4