Firmware Update; Factory Default; Parental Control - Strong SRT 6500 User Manual

Basic Operation

Firmware Update

Upgrade software by inserting USB device into the USB port.
Please visit the Software Updates section of the STRONG website at
http://www.strong.com.au/software.html
the SRT 6500.
Once you have downloaded the software place it on a USB stick, please ensure that
the USB stick has no other files stored on it other than the required software file.
Then click on the "How to Install" link for a complete step by step instruction sheet on
how to update your receiver to the latest software version.

Factory Default

Use this option if you encounter a problem after having changed some parameters.
This option will reset the unit's data to restore it to the factory default settings.
1.
Press [MENU] to open MAIN MENU.
2. Press [UP]/[DOWN] to select "Setting"
3. Press [OK] /[▶] to select "Factory Default".
4. Press [OK] and enter password to confirm.
NOTE: Factory default password is "0000".

Parental Control

1.
Press [MENU] to open MAIN MENU.
2. Press [UP]/[DOWN] to select "Settings"
3. Press [OK] /[▶] to select "Parental Control".
4. Press [OK] and enter password to confirm (Default password is "0000")
There are 8 levels available in "Censorship". Press [UP]/[DOWN] to select the rating
level.
ALL BLOCK: All programs are blocked.
P: Pre-School
C: Children
G: General.
PG: Parental guidance.
M: Mature audience, 15+ year old.
MA: Mature adult audience 15+ year old.
R: Restricted, 18+ year old.
AV: Adult audience, strong violence, 15+ year old.
NOTE: Once censorship level has been selected you will need to enter a PIN number
to view channels or access menus that have been locked.
to download the latest software version for
20