Recording Function; Instant Recording - Strong SRT 6500 User Manual

Recording Function

Before recording, please select the storage destination (Internal HDD/Front USB) of
the recorded program in DVR menu (please refer to page 12 – DVR Setting menu).
The unit is set to record to the Internal HDD
(Built-in Hard disk) as default if Front USB not
selected.
The unit supports External HDD's or USB
device's in FAT，FAT32 format.

Instant Recording

1. Activate Instant Recording by pressing [REC]
in Live TV Mode.
2. Currently viewed
recording, default recording time is 3 hours.
To adjust recording duration press [REC]
again. Here you can select 3 minutes to 24
hours using the numeric keys.
3. Alternatively you can set the recording to
end once current program or next program
are finished.
4. Press [STOP] to stop recording instantly,
recorded programs can be viewed from the
DVR menu.
Manual Timer Recording/Reminder
1. Press [Timer] key in Live TV mode.
2. Press Red button to insert a new Timer.

Select Timer ON/OFF (default is ON)

Select Record or Remind function

Select the desired channel for timer
recording by
[RIGHT].

Select the date for recording

Select the start time for recording

Select the length of recording time

Select the mode of recording (Once/Daily/Weekly/Weekday/Weekend)
3. Press [OK] to save this Timer
4. Press [OK] to edit the information of the Timer
5. Press Green button to delete the set timer.
6. Press Yellow button to delete all the set timers.
7. Press the Blue button to re-arrange the sequence of the timer list by:
a) Start time for the timer
b) Created time of the timer
8. Press [EXIT] to exit the screen.
channel will begin
pressing [LEFT]
21
or