Strong SRT 6500 User Manual page 46

RAY PLAYER
BLU-
Specific setting method and description
Menu Submenu
General System
Item
Screen saver
(prevent screen aging)
Auto-play
Reset
(restore default settings)
Upgrade
(software update)
Easy setup
(initial setup)
BUDA
(for BD-J disc playing)
Setting and description
ON
Enable screen saver. If there is no operation in
five minutes while playing, the screen saver will
be activated automatically, and enters standby
mode if there is no operation in ten minutes.
OFF
Disable this function
ON
Enable auto-play. When a disc is inserted, the
player will read and play automatically.
OFF
Select this option and press [OK], and the
following dialog box appears:
Reset
Restore default settings?
OK
Press or to select [OK], and press it to restore
all the settings to default, or select [Cancel] to exit
the dialog box.
Disc
The upgrade program is saved in the disc. When
the auto-upgrade function is set to "OFF", you
need to select the upgrade option manually after
inserting the disc.
USB
The upgrade program is saved in USB disk.
Network
Connect the network cable to the NIC interface
and make sure that the network connection is
normal.
Select this function and press [OK], to show "Easy
Setup Wizard" on the screen. Please follow the
prompt to operate.
BUDA info (release the storage space of BUDA
info)
When playing BD-J or BD-LIVE disc, if the
storage space is insufficient, please select
[Format] and press [OK] to clear the BUDA info in
the USB disk to release the space and the USB
44
Cancel