Time Shift Function; Standby Modes - Strong SRT 6500 User Manual

Basic Operation

Time Shift Function

1. Activate Time Shift by pressing [PAUSE]
in Live TV Mode. Time Shift supports a
record time of up to 2 hours.
2. The Main Screen will be paused.
3. The information displays the amount of
time you are behind Live TV.
4. Press [PLAY]/[PAUSE]
viewing.
5. While playing in time shift mode, you can
press [PAUSE] again to pause the main
screen.
6. Press [FF] to fast forward at 2X, 4X, 8X, 16X, 32X, 64X speeds
Press [REW] to rewind at 2X, 4X, 8X, 16X, 32X, 64X speeds.
7. Press [SKIP FWD] to skip forward 30 seconds
8. Press [SKIP BACK] to skip back 30 seconds
9. Press [STOP] to stop time shift and return to Live mode.
Auto Time Shift Function
1. Press the [MENU] button to enter the main
menu, select [DVR] DVR SETTING.
2. Select [ENABLE] to activate the auto time
shift function.
3. Auto Time Shift function mode will begin 30
seconds after channel change automatically
4. Press [PAUSE] to activate time shift
function.

Standby Modes

1. Press the [POWER] button, the unit will enter passive standby mode. The unit
will enter full standby mode after 10 seconds.
2. While recording if [POWER] button is pressed, a dialog box will be displayed-

Select [Yes]: Recording will be stopped and unit will enter passive standby
mode, unit will enter full standby mode after 10 seconds.

Select [No]: Unit will continue recording and enter passive standby mode.
When recording is complete, the unit will enter full standby mode.

Select [Cancel]: To cancel this operation.
3. When a timer is set to begin while unit is in full standby mode, it will turn on
automatically and enter passive standby mode and begin recording. Once
recording is complete, the unit will re enter full standby mode.
to resume
19