Table of Contents
Advertisement
Sensor
Item
This item is used to set the media sensor type and calibrate the
Auto Calibration
selected sensor. Printer will feed 2 to 3 gap labels to calibrate the
sensor sensitivity automatically.
In case "Auto Calibration" cannot apply to the media, please use
"Manual Setup" function to calibrate the sensor manually. Follow the
LCD steps as shown.
Manual Setup
Note: You can open the media cover to move the paper but have to
close the media cover for each scan.
Threshold
This item is used to fix the calibrated sensor sensitivity.
Maximum Length
This item is used to set the max. Calibrate length.
This item is used for pre-printed paper. If this advanced function is
Advanced
turned "ON" then you can setup the min. paper and max. gap/black
mark size.
Description
Default
N/A
N/A
Fixed
253
OFF
37
Advertisement
Table of Contents
