Diagnostics; Print Config; Dump Mode; Battery - Printronix M4L Administrator's Manual

Mobile printer

Hide thumbs Also See for M4L:

Table of Contents

Diagnostics

This feature is used to print current printer configuration to the label. On the configuration printout,

there is a print head test pattern, which is useful for checking if there is any dot damage on the

printhead heater elements. Please refer to Self Test in Chapter 4 for more details.

Captures the data from the communications port and prints out the data received by printer. In

Dump mode, all characters will be printed in 2 columns. (Please refer to Dump Mode in Chapter

4) The left side characters are received from your system and right side data are the

corresponding hexadecimal value of the characters. It allows users or engineers to verify and

debug the program.

Note: Dump mode requires 4" paper/label width.

This feature is used to check the printer battery voltage

Table of Contents