Connecting The Printer; Cable Communications; Wireless Communication With Bluetooth; Wireless Communication With Wifi - Printronix M4L Administrator's Manual

Connecting the Printer

The printer must establish communication with a host terminal which sends the data to be printed.
There are three ways to connect the M4L series:

By an USB cable between the printer and its host terminal

By a Bluetooth short-range radio if Bluetooth is installed and enabled.

By a Wireless LAN per 802.1 b/g/n (Option)

Cable Communications

Open the interface cover and connect the printer to the computer/smart phone (host terminal) with
USB cable (USB to USB or USB to RS-232)

Wireless Communication with Bluetooth

Power on the printer
Open the Bluetooth device for host terminal to scan for printer's Bluetooth device.
Connect the Bluetooth devices. The Bluetooth icon will display in the LCD panel if devices have
been paired.
Address
Name
PIN
Note: Please refer to Setting Bluetooth by Configuration Utility in section 5 to change the
name and PIN by Configuration Utility or refer to Bluetooth in section 6 to change the name and
PIN directly

Wireless Communication with WiFi

You should set the WLAN settings via the USB cable when first setting up the printer. Please refer
to Setting WiFi be Configuration Utility in section 5 to set up the WiFi module. Please refer to
Wireless LAN in section 6 to set up the WLAN settings
20
Printer Bluetooth default
You can find this info from configuration (self-test) page,
Please refer to Power On Utilities section for how to print the self-
test.
BT-SPP
0000