Motion Detection Sensitivity; Setup Masking Area; Record Time; Event List - ESP GuardCam WF-SAR Installation And Operation Manual

12

Motion Detection Sensitivity

Motion detection sensitivity can be selected on
each camera from highest sensitivity to off. This
can be useful when motion detection recording
mode is selected for the whole system but only
certain cameras are required to make a motion
record trigger.
 Use ▼▲ to select motion detection sensitivity
section
 Use
to highlight camera for setup
 Use ▼▲ to adjust sensitivity level
 Press ESC to save and exit.

Setup Masking Area

Specific sections within the viewed area can be
masked to avoid false or repetitive triggering by
motion detection.
 Use ▼▲ to select SETUP MASKING AREA
section.
 Use
to highlight camera for setup, press
MENU to enter.
 Usee
to highlight the grid for motion
detection area. Use the MENU button to
mask/unmask within the grid. Movements
taking place inside the masked area will be
ignored.
 Use
to select another grid for setup
or press ESC to save and exit.

Record Time

The length of record time following a motion
trigger can be selected between three options.
2 minutes, 5 minutes or 10 minutes.
 Use ▼▲ to select RECORD TIME section.
 Use
to highlight recording period: 2 Min /
5 Min / 10 Min, press the MENU button to
confirm.
 Press ESC to save and exit.

Event List

Playback
 Select EVENT LIST, press the main menu to
enter sub-menu.
 Use
to highlight desired DATE index for
playback. Press MENU to confirm selection and
enter selected folder.