System Setup; Power Saving - ESP GuardCam WF-SAR Installation And Operation Manual

System Setup

14
 Select to set up the general configuration of
the system.
 Select SYSTEM SETUP, press the MENU button
 Use ▼ to select the sub menu to enter sub-menu.
Date and Time
 Use ▲▼ to highlight DATE AND TIME, press
MENU to enter.
 Use
DATE / HOUR / MINUTE, use ▲▼ to adjust
to highlight adjust: YEAR / MONTH /
each section and press MENU to confirm
adjustment.
 Press ESC to save and exit.
TV Output
Adjusts the TV output protocol between PAL and
NTSC
 NB Ensure PAL is selected for use in the UK.
 Use
to highlight NTSC or PAL, press MENU
to confirm selection.
 Press ESC to save and exit.

Power Saving

After a preset time following no button or menu
selection the system can automatically switch off
the monitor (only when using GuardCam WF –MR) to
save energy and preserve screen life.
 Use
to select SCREEN OFF AFTER 5
MINUTES / SCREEN OFF AFTER 10 MINUTES IDLE
/ SCREEN ALWAYS ON, press MENU to confirm
setting.
 Press ESC to save and exit.
NOTE: POWER SAVING is for GuardCam WF-MR ONLY.